Hello! Nadine here today sharing a mixed media board I created for no other reason than because it was fun. Sometimes I just like to get out my supplies and play. With no plan in mind, just using different mediums and see what I come up with.
![](https://i0.wp.com/www.thecraftersworkshop.com/wp-content/uploads/2020/01/Mixed-Media-Canvas-Board-by-Nadine-Carlier-2-1024x1024.png?resize=1024%2C1024&ssl=1)
The Crafter’s Workshop has provided me with some of the products to create this project. The opinions I share are solely my own.
I first sprayed a couple of different color sprays onto the TCW9053 6×6 Mixed Media Board. Then using the new TCW9052 Super Thick Gel, I mixed a little bit of color powders and applied it on the board over the TCW905 Leaf Emblem Stencil, making sure to not cover the entire stencil.
![](https://i0.wp.com/www.thecraftersworkshop.com/wp-content/uploads/2020/01/Mixed-Media-Canvas-Board-by-Nadine-Carlier-1-1024x768.png?resize=1024%2C768&ssl=1)
Once the Super Thick Gel was dry I aligned the stencil back up and on the areas that I had missed with the Super Thick Gel, I applied some TCW9049 Tacky When Dry Gel Medium. I waited about 15 minutes for the Tacky When Dry was dry and then pressed on a piece of transfer foil over it.
![](https://i0.wp.com/www.thecraftersworkshop.com/wp-content/uploads/2020/01/Mixed-Media-Canvas-Board-by-Nadine-Carlier-3-1024x768.png?resize=1024%2C768&ssl=1)
Then on two of the corners, I used part of the stencil again with some TCW9004 Light & Fluffy Modeling Paste. Waited for it to dry again and then rubbed on gold metallic polish to give it just a little shimmer.
Then added a “fun” title and I was done.
![](https://i0.wp.com/www.thecraftersworkshop.com/wp-content/uploads/2020/01/Mixed-Media-Canvas-Board-by-Nadine-Carlier-2-1-1024x768.png?resize=1024%2C768&ssl=1)
Thank you so much for stopping by and checking out my project!
Nadine Carlier – The Crafter’s Workshop Design Team Member